Many people attempt to do their own plumbing in order to save money on repair costs. They often fail due to a lack of proper plumbing knowledge or by using the wrong tools for the job. If you would like to do your own plumbing without doing more harm than good, then read the tips in the following article.
To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.
Don’t pay a plumber until the job is completed. A plumber may require some money upfront, but it’s wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.
Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.
To keep your garbage disposal lasting for a long time, make sure you clean it on a daily basis. Prevent unsavory disposal odors through regular use of citrus peel, cherry pits and dish detergent.
Run cold water through your garbage disposal. The cold water will help keep the blades nice and sharp and will allow for a much smoother disposal. Using hot water will cause grease to liquefy and accumulate in the drain, which will cause clogs in your pipes.
Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.
Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.
If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the main line, and you must contact a professional to take care of this problem for you.
While you may not be able to tackle every problem that comes up, you can surely feel more confident about dealing with some of the basic stuff. Take any situation step by step, and you will find that it’s not as difficult as you may have thought.